Stark Varg MX tyres
The Stark Varg MX runs one fitment, 80/100-21. It is staggered: a 80 section at the front and a 110 at the back, so the two can never be swapped across axles and the rear goes first.
Every fitment
| Generation | Trim | Wheel | Tyre size | Load index | Speed | Construction | Marking | Pressure |
|---|---|---|---|---|---|---|---|---|
| Current | Varg MX, 19 inch rear configuration | 21in front, 19in rear, spoked | 80/100-21 front, 110/90-19 rear | SL | none | see plate |
Your own placard is the authority. You will find it on the there is no placard. The size is moulded into the sidewall. Where it disagrees with this page, it wins. Match or exceed the size, load index, speed rating and construction class it gives, and use its pressure figure rather than anything printed on the tyre.
What changes on this machine
The standard motocross pairing, a 21 inch front and a 19 inch rear, on Pirelli Scorpion MX32s from the factory: 80/100-21 and 110/90-19.
No load index or speed rating is moulded on these, because a motocross tyre is built for a closed track and is not approved for the road.
Stark's MX 1.2 page also lists an 18 inch rear configuration on 90/90-21 and 140/80-18. That is a different wheel set, and the figures here do not describe it. Neither do they describe the road-legal Varg EX.
No tyres listed against this fitment yet. Product specifications are published from each manufacturer's own data and that work is not finished for 80/100-21. Match or exceed every figure in the table above and you cannot go far wrong.
Where these figures come from
- Stark Future VARG MX 1.2 product page, tire size (19 inch configuration) front 80/100-21, rear 110/90-19, Pirelli Scorpion MX32: https://starkfuture.com/en-gb/products/stark-varg
- Stark Future VARG MX product page (first model), Pirelli Scorpion front MX32 80/100-21, rear MX32 110/90-19: https://starkfuture.com/en-gb/products/stark-varg-1
Including the manufacturer's own published figure. Neither source is standing next to your vehicle, which is why the placard still wins.
Common questions
- What size tyres does the Stark Varg MX take?
- It runs 80/100-21. The exact fitment for your machine is on There is no placard. The size is moulded into the sidewall.
- Can I fit a cheaper tyre to a Stark Varg MX?
- Only at 80/100-21 or better. That is the figure to hold: a tyre below the load index, the speed rating or the construction class is not a cheaper one, it is the wrong one.