Giant Explore E+ tyres
The Giant Explore E+ runs 57-622 in ETRTO sizing, the width in millimetres followed by the rim bead seat diameter.
Every fitment
| Generation | Trim | Wheel | Tyre size | Inch size |
|---|---|---|---|---|
| Current | Explore E+ 1 / E+ 1 GTS (Giant Crosscut Gravel 2) | 29in | 57-622 | 700x57c |
Your own placard is the authority. You will find it on the printed on the tyre sidewall, next to the pressure range. Where it disagrees with this page, it wins. Match or exceed the size, load index, speed rating and construction class it gives, and use its pressure figure rather than anything printed on the tyre.
What changes on this bike
Giant fits its own Crosscut Gravel 2 in 700x57c, wire bead and tubeless ready, on 25 mm eX25 rims; the same size appears on the 2023 E+ 1 GTS and the current Explore E+ 1.
The cheaper Explore E+ 3 GTS uses a 700x50c version of the same tyre, so the size depends on the trim level, not just the frame.
Giant gives a combined maximum of 150 kg for the Explore E+ 1, and the current model ships with Giant's on-board tyre pressure monitoring.
No tyres listed against this fitment yet. Product specifications are published from each manufacturer's own data and that work is not finished for 57-622. Match or exceed every figure in the table above and you cannot go far wrong.
Where these figures come from
- Giant spec sheet PDF, Explore E+ 1 GTS 2023 (TYRES Crosscut Gravel 2, 700x57c, Wire Bead, Tubeless Ready): https://static.giant-bicycles.com/pdf/giant-explore-e-1-gts-en-au-3187.pdf
- Giant GB spec page, Explore E+ 1 (Tyres Crosscut Gravel 2, 700x57c ... Tyre Pressure Management System): https://www.giant-bicycles.com/gb/explore-eplus-1
- Giant spec sheet PDF, Explore E+ 1 2026 (RIMS Giant eX25, 622x25; TYRES Crosscut Gravel 2, 700x57c; COMBINED MAXIMUM 150kg): https://static.giant-bicycles.com/pdf/giant-explore-e-1-en-ie-4203.pdf
- Giant spec sheet PDF, Explore E+ 3 GTS (TIRES Giant Crosscut Gravel 2, 700x50c): https://static.giant-bicycles.com/pdf/giant-explore-e-3-gts-en-in-3191.pdf
Including the manufacturer's own published figure. Neither source is standing next to your vehicle, which is why the placard still wins.
Common questions
- What size tyres does the Giant Explore E+ take?
- It runs 57-622. The exact fitment for your bike is on Printed on the tyre sidewall, next to the pressure range.
- Can I fit a cheaper tyre to a Giant Explore E+?
- Only at 57-622 or better. That is the figure to hold: a tyre below the load index, the speed rating or the construction class is not a cheaper one, it is the wrong one.